LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Niro Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Supplemental Restraint System Control Module (SRSCM) And Sensors (PHEV)) >> Occupant Classification System (OCS) >> Repair Procedures >> Removal >> Occupant Classification System (OCS) Unit

Occupant Classification System (OCS) Unit

WARNING: This page is about a different car, the 2018 Hyundai Ioniq. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the front passenger seat assembly.

    (Refer to Body - "FRONT SEAT ASSEMBLY ")

  3. Disconnect the occupant classification system unit connector (A).
    G12728039Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the occupant classification system unit (A) after loosening the mounting screws.
    G12728040Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals