LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Niro Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Supplemental Restraint System Control Module (SRSCM) And Sensors (EV)) >> SRS Control Module (SRSCM) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2019 Hyundai Ioniq, 2018 Hyundai Ioniq, and 2017 Hyundai Ioniq. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  3. Remove the floor console.

    (Refer to Body - "FLOOR CONSOLE ASSEMBLY ")

  4. Remove the air duct.
  5. Disconnect the SRSCM connectors.
    G13187484Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the SRSCM (A) after loosening the mounting nuts.
    G13187485Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals