| DTC Strategy |
|
- Poor connector connection
- Open in TPS Supply Circuit
- Short to Ground or Open in TPS2 Signal Circuit
- Faulty TPS2
|
| Enable Condition |
Case 1 |
- Ignition "ON"
- No relevant DTC present
|
| Case 2 |
- Ignition "ON"
- Engine operating state idle: Pedal Value less than 0.01% (Pedal sensor 1 voltage 0.859V, not pushed at all)
- TPS setpoint less than 58% TPS1 and TPS 2 ratio failure detected or TPS1 failure detected
|
| Threshold Value |
Case 1 |
- TPS2 signal voltage lower than 0.12V
|
| Case 2 |
- TPS2 signal voltage at idle lower than 2V
|
| Diagnostic Time |
|
| MIL ON Condition |
|