LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Niro FE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System (PHEV)) >> Injector >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition.
  2. Disconnect the injector connector.
  3. Measure resistance between the injector terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  1.425 - 1.575 Ω [20°C (68°F)]

scientia non olet · About LEMON Manuals