LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Niro FE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Control System (PHEV)) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Inspection >> Throttle Position Sensor (TPS)

Throttle Position Sensor (TPS)

WARNING: This page is about a different variant/trim than selected.
  1. Connect the KDS/GDS on the Data Link Connector (DLC).
  2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.


Throttle angle (°) Output Voltage (V) [Vref=5V]
TPS1 TPS2
0 0.5 4.5
10 0.96 4.05
20 1.41 3.59
30 1.87 3.14
40 2.32 2.68
50 2.78 2.23
60 3.23 1.77
70 3.69 1.32
80 4.14 0.86
90 4.6 0.41
98 4.65 0.35
C.T (0) 0.5 4.5
W.O.T (86) 4.41 0.59
scientia non olet · About LEMON Manuals