LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Niro EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Control System (PHEV)) >> Electric EGR Control Valve >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2018 Hyundai Ioniq. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • After replacing the Electric EGR control valve, MUST perform the "Component Change Routine" procedure. Otherwise trouble related with engine performance or emission control may occur until ECM learning about the component is over.
  1. Turn the ignition switch OFF.
  2. Connect the GDS to Data Link Connector (DLC).
  3. Turn ignition switch ON.
  4. Select "Vehicle, Model year, Engine, System".
  5. Select "Vehicle S/W Management".
  6. Select "Component Change Routine".
  7. Select "EGR Valve Change".
  8. Perform the procedure in accordance with the message
    G12727219Courtesy of HYUNDAI MOTOR AMERICA
    G12727220Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals