LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Forte FE, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Reduction Gear Control System) >> Inhibitor Switch >> Repair Procedures >> Inspection >> Signal Circuit Inspection

Signal Circuit Inspection

WARNING: This page is about a different car, the 2019 Kia Soul EV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the Inhibitor switch connector.
  2. Ignition KEY "ON" & Engine "OFF".
  3. Measure voltages between each terminal and chassis ground during shift lever changed "P, R, N, D".

    Specification: See below "Signal Code Table"

scientia non olet · About LEMON Manuals