| DTC Strategy |
|
- Incorrect wheel speed sensor mounting (air gap)
- Wheel speed sensor knuckle mounting bolt bad connection
- Deformation/contamination of tone wheel and poor performance
- External mechanical interference (vibration)
- Defective rotor and wheel bearing
- Faulty wheel speed sensor
- Faulty sensor circuit
- Faulty HECU
|
| Enable Condition |
- Ignition "ON"
- No related DTC is stored
|
| Threshold Value |
Case1 |
- When the signal of the wheel speed sensor suddenly changes
- When the signal from the wheel speed sensor is very high
|
| Case2 |
- When the signal of the wheel speed sensor periodically drops
|
| Case3 |
- When the signal from the wheel speed sensor has noise
|
| Detecting Time |
Case1 |
|
| Case2 |
|
| Case3 |
|
| Warning Lamp |
|
| Disable Condition |
- All WSS is normal while driving after ignition "OFF/ON"
|