LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Forte EX >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Rear Wheel Speed Sensor >> Repair procedures >> Inspection

Repair procedures: Inspection

  1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
    NOTE: In order to protect the wheel speed sensor, when measuring output voltage, a 100 Ω resister must be used as shown.
    G12831952Courtesy of KIA MOTORS AMERICA, INC.
  2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.
    G12831953Courtesy of KIA MOTORS AMERICA, INC.

    V_low: 0.59V - 0.84V

    V_high: 1.18V - 1.68V

    Frequency range: 1 - 2, 500Hz

scientia non olet · About LEMON Manuals