LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Cadenza Technology >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (4 Of 6) >> DTC P0463-00: Fuel Level Sensor 'A' Circuit High Input >> Component Inspection >> Check FLS Resistance

Check FLS Resistance

  1. Refer to FUEL SENDER REMOVAL and remove Fuel Pump (Fuel Sender) Unit.
  2. Move the Fuel Sender by hands and monitor "Fuel Level" parameter in "Current Data" with KDS/GDS.
  3. Is the value changes as fuel sender is moved?
  4. Are the parameters displayed correctly?

    YES 

    NO 

    • Carefully re-do this troubleshooting guide steps.
    • If no problems were found with the circuits or connectors, replace the Fuel Pump (Fuel Sender) and go to "Verification Of REPAIR " procedure.
scientia non olet · About LEMON Manuals