Repair Procedures: Inspection
Information
CAUTION:
Inspect the connector thoroughly for looseness, poor connection, bending, corrosion, contamination, deformation, or damage.
- Disconnect the parking switch connector.
- Turn Ignition "ON", & engine "OFF".
- Measure the output signal in each range (P, R, N, D).
Signal code table
| Signal |
P |
R |
N |
D |
| S1 |
10 - 26.4% |
31.4 - 55.0% |
57.3 - 73.7% |
76.6 - 90% |
| S2 |
90 - 73.6% |
68.6 - 45.0% |
42.7 - 26.3% |
23.4 - 10% |