LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Stinger Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transmission Control System - 3.3L) >> Inhibitor Switch >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.

Information 

CAUTION: Inspect the connector thoroughly for looseness, poor connection, bending, corrosion, contamination, deformation, or damage.
  1. Disconnect the parking switch connector.
  2. Turn Ignition "ON", & engine "OFF".
  3. Measure the output signal in each range (P, R, N, D).

    Signal code table 

    Signal P R N D
    S1 10 - 26.4% 31.4 - 55.0% 57.3 - 73.7% 76.6 - 90%
    S2 90 - 73.6% 68.6 - 45.0% 42.7 - 26.3% 23.4 - 10%
scientia non olet · About LEMON Manuals