LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sorento SX, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Automatic Transaxle Control System - 2.4L) >> Input Speed Sensor >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Disconnect the solenoid valve connector (A).
    Fig 1: Disconnecting Solenoid Valve Connector
    G12180435Courtesy of KIA MOTORS AMERICA, INC.
  4. Measure the resistance between power terminal (14) and signal terminal (8).

    Specification:  Approx. 0.88 MΩ

    Fig 2: Solenoid Valve Connector Terminals
    G12180436Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals