LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sorento L >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module (SRSCM) & Sensors >> SRS Control Module (SRSCM) >> Repair >> Removal

SRS Control Module (SRSCM): Repair: Removal

  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least thirty seconds before beginning to work.
  3. Remove the floor console.

    (Refer to "FLOOR CONSOLE ")

  4. Remove the rear air vent duct (A).
    Fig 1: Locating Rear Air Vent Duct
    G12172371Courtesy of KIA MOTORS AMERICA, INC.
  5. Pull up the lock of the SRSCM connector, and then disconnect the connector (A).
    Fig 2: Locating SRSCM Connector
    G12172372Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove three (3) SRSCM mounting bolts from the SRSCM, and then remove the SRSCM.
CAUTION: You must remove or install SRSCM or other SRS components with the ignition switch OFF to avoid accidental airbag deployment.
scientia non olet · About LEMON Manuals