LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Body Control Module Diagnosis) >> DTC B1602: CAN Error >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2018 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect KDS/GDS and select "Diagnostic Trouble Codes (DTC)  " mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is there any DTC output?

    YES 

    • Go to applicable troubleshooting procedure.

    NO 

    • Problem is corrected and the system operation performs to specification at this time.
scientia non olet · About LEMON Manuals