LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sedona SXL >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Lighting System) >> Hazard Lamp Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the center fascia lower panel.

    (Refer to Body - "CENTER FASCIA PANEL ")

  3. Remove the heater & A/C control unit (A) after loosening the screws from the center fascia lower panel (B).
    Fig 1: Locating Heater & A/C Control Unit With Screws
    G12272215Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals