| Tailgate Start Opening |
Overhead Console SW |
2 |
2 |
|
| Inner SW |
2 |
2 |
|
| Outside Handle SW |
2 |
2 |
|
| Smart/Remote Key |
2 |
2 |
|
| Tailgate Start Closing |
Overhead Console SW |
2 |
2 |
|
| Inner SW |
2 |
2 |
|
| Outside Handle SW |
2 |
2 |
|
| Smart/Remote Key |
2 |
2 |
|
| Direct direction change Close -> Open |
Overhead Console SW |
2 |
2 |
|
| Inner SW |
2 |
2 |
|
| Outside Handle SW |
2 |
2 |
|
| Smart/Remote Key |
2 |
2 |
|
| Garage Position saved |
INR SW |
2 |
- |
Buzzer confirms "new garage position" saved |
| Obstacle detection (reverse operation start) |
|
3 |
- |
|
| Smart Tailgate |
Single Blinking |
1 |
- |
|
| Double Blinking |
2 |
|
| During Calibration Run |
Continuous On/Off beep |
|
- |
Activate buzzer but no Hazard |
| System Error |
- |
3 |
- |
PCU/Tailgate antiplay active, Over/Under voltage condition, End position/position error, spindle error, CAN error, switch press while Latch closed when Tailgate open |
| Tailgate not closed |
|
10 |
10 |
Latch Lock switch not present |
| Max. End Position learned |
|
- |
2 |
Hazard confirms "learning finished" |
| Max. End Position deleted |
|
1 |
- |
Buzzer confirms "position deleted" |
| Car moving with open Tailgate |
|
10 |
- |
|