LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sedona LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Airbag Module And Clock Spring) >> Passenger Airbag (PAB) Module >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative terminal, and wait for at least three minutes before beginning to work.
  2. Install in the reverse order of removal.
  3. Reconnect the battery negative terminal.
  4. After installing the passenger airbag (PAB), confirm proper system operation:
    • Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
scientia non olet · About LEMON Manuals