LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sedona LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Airbag Module And Clock Spring) >> Knee Airbag (KAB) Module >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable, and wait for at least three minutes before beginning to work.
  2. Remove the crash pad lower panel.

    (Refer to Body (Interior and Exterior) - "CRASH PAD LOWER PANEL ")

  3. Loosen the nuts (A) and then disconnect the connector (B).

    Tightening torque: 

    6.0 - 8.0 N.m (0.6 - 1.2 kgf.m, 4.4 - 5.9 lb.ft)

    Fig 1: Locating Knee Airbag Nuts
    G12294378Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Locating Knee Airbag Connector
    G12294379Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals