LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Automatic Transaxle Control System) >> Output Speed Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the valve body assembly.

    (Refer to Hydraulic System - "VALVE BODY ")

  2. Disconnect the input & output speed sensor connector (A).
  3. Remove the input & output speed sensor (B) after loosening the bolts.

    Tightening torque: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Fig 1: Locating Input & Output Speed Sensor And Connector
    G12274729Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals