Repair Procedures: Installation
WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Install the component to the specified torques.
- Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.
- The sensor connector must be installed parallel to the direction of the engine.
- Install in the reverse order of removal.
Knock sensor mounting bolt:
15.7 ~ 23.5 N.m (1.6 ~ 2.4 kgf.m, 11.6 ~ 17.4 lb-ft)