LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sedona L >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Control System) >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation nuts (B) and then remove the accelerator pedal module.
    Fig 1: Locating Accelerator Position Sensor Connector And Installation Nuts
    G12274655Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals