LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sedona L >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Sliding Door System >> Power Sliding Door (PSD) Control Module >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the luggage side trim [LH].

    (Refer to Body - "LUGGAGE SIDE TRIM ")

  3. Disconnect the power sliding door control module connector (A).
  4. Remove the power sliding door control module (B) after loosening the screws.
    Fig 1: Locating Power Sliding Door Control Module Connector
    G12272348Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals