LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Engine Control System) >> Accelerator Position Sensor (APS) >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the accelerator position sensor (B) after loosening the mounting bolts.

    Accelerator pedal sensor mounting bolt  :

    8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb.ft)

Fig 1: Disconnecting Accelerator Position Sensor Connector
G12290747Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals