Repair procedures: Inspection
WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the KDS on the Data Link Connector (DLC).
- Switch "ON" the ignition.
- Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
ACCELERATOR POSITION SENSOR VOLTAGE SPECIFICATIONS
| Accelerator Position | Output Voltage (V) [Vref = 5V] | |
|---|---|---|
| APS1 | APS2 | |
| C.T | 0.7 - 0.8 | 0.33 - 0.43 |
| W.O.T | 3.85 - 4.35 | 1.93 - 2.18 |