LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Control System) >> Purge Control Solenoid Valve (PCSV) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the purge control solenoid valve connector (A).
  3. Disconnect the vapor hoses (B) from the purge control solenoid valve.
  4. Remove the valve from the bracket.
    Fig 1: Locating Purge Control Solenoid Valve Connector And Vapor Hoses
    G12274675Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals