LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Control System) >> Fuel Pressure Control Valve (FPCV) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the fuel pressure regulator valve connector.
  3. Measure resistance between the fuel pressure regulator valve terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  1.04 ~ 1.27 [23°C(73.4°F)]

scientia non olet · About LEMON Manuals