Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the air intake hose (A) after disconnect the hose and clamp.

Fig 1: Locating Air Intake Hose
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the ETC module connector (A).
Disconnect the coolant hoses (B).

Fig 2: Locating ETC Module Connector And Coolant Hoses
Courtesy of KIA MOTORS AMERICA, INC.
Remove the installation bolts, and then remove the ETC module (A) from the engine.

Fig 3: Locating ETC Module
Courtesy of KIA MOTORS AMERICA, INC.