[Resistance Inspection]
WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF.
- Remove the OTS. (Refer to "REMOVAL ")
- After immersing the thermistor of the sensor into engine coolant, measure resistance between the OTS terminals 1 and 2.
- Check that the resistance is within the specification.
Temperature Resistance (kΩ) °C °F -40 -40 52.15 -20 -4 16.52 0 32 6.0 20 68 2.45 40 104 1.11 60 140 0.54 80 176 0.29 100 212 0.16 120 248 0.10