LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Parking Guide System Diagnosis) >> DTC B161F-00: Camera Input Error >> DTC Inspection >> Monitor KDS/GDS Data

Monitor KDS/GDS Data

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition "OFF".
  2. Connect KDS/GDS to Data Link Connector (DLC).
  3. Ignition "ON" & Engine "ON".
  4. Monitor parameters in "Current Data" with KDS/GDS.
  5. Is the displayed parameter within specification?

    YES 

    • Fault might be intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and control module memory is not cleared yet. Thoroughly check terminal of battery, all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage.
    • Repair or replace as necessary and then go to "VERIFICATION OF REPAIR " procedure.

    NO 

scientia non olet · About LEMON Manuals