LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Sedona EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Audio System) >> Audio Unit >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • Eject all discs before removing the Audio head unit to prevent damaging the CD player's loading mechanism.
  • When removing the interior trim pieces, use a plastic panel removal tool to prevent damaging the surface.
  • Be careful of storing and handling the crash pad during removal/installation as lubricant and oil may leave stain on the trim.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad center lower panel.

    (Refer to Body - "CRASH PAD CENTER PANEL ")

  3. Remove the audio head unit (A) after loosening the screws.
    Fig 1: Audio Head Unit With Screws
    G12297209Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the audio head unit after disconnecting the connectors and antenna cable (A).
    Fig 2: Locating Antenna Cable Connector
    G12297210Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: When the compact disc is not ejected, do not remove it forcibly.
scientia non olet · About LEMON Manuals