LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Rio LX, 4D Hatchback, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle Control System >> Control Shaft Complete >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Shift the gear to "neutral".
  2. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - " AIR CLEANER  ") 

  3. Remove the battery and battery tray.

    (Refer to Engine Electrical System - " BATTERY  ") 

  4. Remove the control cable from the control shaft after remove the pins (A).
    G12576803Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the control shaft complete (A).

    Tightening torque: 

    19.6 - 26.5 N.m (2.0 - 2.7 kgf.m, 14.5 - 19.5 lb-ft)

    G12576804Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals