LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Rio LX, 4D Hatchback, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle Control System >> Control Shaft Complete >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Install in the reverse order of removal.
    NOTE:
    • Install the control shaft complete after setting the neutral state.
      G12576805Courtesy of KIA MOTORS AMERICA, INC.
    • Apply the sealant to the contact surface of transaxle and control shaft.

      Specified sealant  : Anaerobic adhesive for flange

      G12576806Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals