LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Occupant Classification System Diagnosis (PHEV)) >> DTC B1697-87: ACU Communication Error >> Wiring Inspection >> CAN Communication Line Inspection >> Check Short To Ground In CAN Communication Line

Check Short To Ground In CAN Communication Line

WARNING: This page is about a different car, the 2017 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition "OFF".
  2. Disconnect all related module connectors.
  3. Measure resistance between Pin No. 13 (High) terminal of IGPM and chassis ground.
  4. Measure resistance between Pin No. 14 (Low) terminal of IGPM and chassis ground.

    Specification  : ∞ (Infinite) Ω

  5. Is the measured resistance within specification?

    YES 

    • Fault is intermittent caused by poor contact in the sensor's and/or SRSCM's connector or was repaired and SRSCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "Verification Of VEHICLE REPAIR " procedure.

    NO 

scientia non olet · About LEMON Manuals