LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Multi Function Camera Diagnosis (PHEV)) >> DTC C160A-87: Local CAN BUS-Off >> Wiring Inspection >> Local-CAN Communication Line Inspection >> Local-CAN Line Inspection

Local-CAN Line Inspection

WARNING: This page is about a different car, the 2017 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition "OFF"
  2. Disconnect battery (-) cable.
  3. Disconnect MFC/LKAS/LDWS and SCC connector.
  4. Measure the resistance between Pin No. 11 (Local-CAN High) terminal of MFC/LKAS/LDWS and Pin No. 7 (Local-CAN High) terminal of SCC.
  5. Measure the resistance between Pin No. 3 (Local-CAN Low) terminal of MFC/LKAS/LDWS and Pin No. 6 (Local-CAN Low) terminal of SCC.

    Specification  : Approx. below 1Ω

  6. Measure the resistance between Pin No. 11 (Local-CAN High) Terminal And Pin No. 3 (Local-CAN Low) terminal of MFC/LKAS/LDWS.

    Specification: ∞  (infinite) Ω

  7. Is the measured value within specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals