Repair Procedures: Installation
WARNING: This page is about a different car, the 2017 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not turn the ignition switch ON and do not connect the battery terminal while replacing the front impact sensor.
- Install the new front impact sensor.
- Tighten the front impact sensor mounting bolt.
Tightening Torque:
7.8 - 11.7 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.6 lb.ft)
- Connect the front impact sensor.
- Reconnect the battery negative terminal.
- After installing the Front Impact Sensor, confirm proper system operation:
- Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.