LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Engine Control System (PHEV)) >> Engine Control Module (ECM) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air duct and air cleaner.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Remove the reservoir mounting bolts (A).

    Reservoir mounting bolt: 

    3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb.ft)

    G12347243
  4. Disconnect the ECM connector (A).
    G12347244
  5. Remove the ECM bracket assembly after loosening the mounting nuts (A) and bolts (B).

    ECM bracket assembly mounting nut/bolt: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G12347245
  6. Remove the ECM after loosening the mounting nuts (A).
G12347246
scientia non olet · About LEMON Manuals