LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Engine Control System (PHEV)) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air cleaner.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses.
  5. Remove the installation bolts (B), and then remove the ETC module from the engine.
    G12347255
scientia non olet · About LEMON Manuals