LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Engine Control System (PHEV)) >> CVVT Oil Control Valve (OCV) >> Repair Procedures >> Removal >> Notes

Repair Procedures: Removal: Notes

WARNING: This page is about a different car, the 2017 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the CVVT oil control valve connector (A).
  3. Remove the installation bolt (B), and then remove the valve from the engine.

    CVVT oil control valve mounting bolt: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

scientia non olet · About LEMON Manuals