Ground Circuit Inspection
WARNING: This page is about a different car, the 2017 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition "OFF".
- Disconnect Battery (-) terminal.
- Refer to RAIN SENSOR and disconnect Rain Sensor connector.
- Measure resistance between Pin No. 3 (Ground) terminal of Rain Sensor harness connector and chassis ground.
Specification : Approx. below 1Ω
- Is the measured value within specification?
YES
- Go to "LIN Communication Line Inspection" procedure.
NO
- Repair open or short in power circuit between Rain Sensor and Chassis ground and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.