LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Forte LX, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Integrated Gateway Power Module Diagnosis) >> DTC C1819-00: CAN Time-Out TPMS >> Wiring Inspection >> Circuit Inspection >> CAN Communication Line

CAN Communication Line

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
CAN COMMUNICATION LINE INSPECTION SPECIFICATION

CAN Communication Line Inspection
Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Ignition "OFF".
  2. Disconnect auxiliary battery (-) cable.
  3. Disconnect the electrical connector(s) from the concerned component and IGPM.
IGPM connector 3 (C-CAN Low) IGPM connector 4 (C-CAN High) Approx. 120Ω
BCM (TPMS) connector 20 (C-CAN Low) BCM (TPMS) connector 19 (C-CAN High) Approx. 120Ω
IGPM connector 3 (C-CAN Low) BCM (TPMS) connector 20 (C-CAN Low) below 1Ω
IGPM connector 4 (C-CAN High) BCM (TPMS) connector 19 (C-CAN High) below 1Ω
Good 
No Good