Dual Clutch Transmission DTCS
WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
DUAL CLUTCH TRANSMISSION DIAGNOSTIC TROUBLE CODE IDENTIFICATION
| DTC | Description |
|---|---|
| DTC P0601 | 41: Internal Control Module Memory Check Sum Error |
| DTC P0601 | 47: Functional Safety Level 3 S/W Fail |
| DTC P0601 | 48: Functional Safety Level 2 S/W Fail |
| DTC P06B0 | 11: Odd Sensor Supply Short To Ground |
| DTC P06B3 | 11: Even Sensor Supply Short To Ground |
| DTC P0705 | 29: Inhibitor Switch Invalid Code |
| DTC P0705 | 64: Inhibitor Switch Unused Code |
| DTC P0715 | 12: Input Speed Sensor 1 Short To Battery |
| DTC P0715 | 14: Input Speed Sensor 1 Short To Ground/Open |
| DTC P0716 | 03: Input Speed Sensor 1 Circuit Range/Performance (Invalid Pulse Width) |
| DTC P0716 | 31: Input Speed Sensor 1 Circuit Range/Performance (No Pulse) |
| DTC P073E | 07: Gear Dropout Reverse Gear |
| DTC P073E | 71: Unable to Engage (Select) Reverse Gear |
| DTC P073E | 73: Unable to Engage (Shift) Reverse Gear |
| DTC P073E | 77: Unable to Disengage (Shift) Reverse Gear |
| DTC P073F | 07: Gear Dropout Gear 1 |
| DTC P073F | 71: Unable To Engage (Select) Gear 1 |
| DTC P073F | 73: Unable To Engage (Shift) Gear 1 |
| DTC P073F | 77: Unable To Disengage (Shift) Gear 1 |
| DTC P074A | 07: Gear Dropout Gear 2 |
| DTC P074A | 71: Unable To Engage (Select) Gear 2 |
| DTC P074A | 73: Unable To Engage (Shift) Gear 2 |
| DTC P074A | 77: Unable To Disengage (Shift) Gear 2 |
| DTC P074B | 07: Gear Dropout Gear 3 |
| DTC P074B | 71: Unable To Engage (Select) Gear 3 |
| DTC P074B | 73: Unable To Engage (Shift) Gear 3 |
| DTC P074B | 77: Unable To Disengage (Shift) Gear 3 |
| DTC P074C | 07: Gear Dropout Gear 4 |
| DTC P074C | 71: Unable To Engage (Select) Gear 4 |
| DTC P074C | 73: Unable To Engage (Shift) Gear 4 |
| DTC P074C | 77: Unable To Disengage (Shift) Gear 4 |
| DTC P074D | 07: Gear Dropout Gear 5 |
| DTC P074D | 71: Unable To Engage (Select) Gear 5 |
| DTC P074D | 73: Unable To Engage (Shift) Gear 5 |
| DTC P074D | 77: Unable To Disengage (Shift) Gear 5 |
| DTC P074E | 07: Gear Dropout Gear 6 |
| DTC P074E | 71: Unable To Engage (Select) Gear 6 |
| DTC P074E | 73: Unable To Engage (Shift) Gear 6 |
| DTC P074E | 77: Unable To Disengage (Shift) Gear 6 |
| DTC P0805 | 64: Clutch 1 Motor Hall Sensor Circuit |
| DTC P0820 | 08: TGS Lever Complement Value |
| DTC P0820 | 16: TGS Lever Under Voltage |
| DTC P0820 | 17: TGS Lever Over Voltage |
| DTC P0820 | 1C: TGS Lever Voltage Out Of Range |
| DTC P087A | 64: Clutch 2 Motor Hall Sensor Circuit |
| DTC P0880 | 1C: TCM Power Input |
| DTC P0900 | 01: Clutch 1 Motor U/V/W Circuit |
| DTC P0901 | 71: Clutch 1 System Actuator Stuck |
| DTC P0901 | 73: Clutch 1 System Stuck OFF |
| DTC P0901 | 78: Clutch 1 System Reference Position Failure |
| DTC P0901 | 7F: Clutch 'A' Actuator Control Circuit Range/Performance |
| DTC P0904 | 12: Select 1 Position Sensor Short To Battery |
| DTC P0904 | 14: Select 1 Position Sensor Short To Ground/Open |
| DTC P090A | 01: Clutch 2 Motor U/V/W Circuit |
| DTC P090B | 71: Clutch 2 System Actuator Stuck |
| DTC P090B | 73: Clutch 2 System Stuck OFF |
| DTC P090B | 78: Clutch 2 System Reference Position Failure |
| DTC P090B | 7F: Clutch 'B' Actuator Control Circuit Performance |
| DTC P0910 | 11: Select 1 Solenoid Push/Pull Short To Ground |
| DTC P0910 | 12: Select 1 Solenoid Push/Pull Short To Battery |
| DTC P0910 | 13: Select 1 Solenoid Push/Pull Open |
| DTC P0910 | 15: Select 1 Solenoid LSD Short To Battery |
| DTC P0914 | 64: Shift 1 Motor Hall Sensor Circuit |
| DTC P0920 | 01: Shift 1 Motor U/V/W Circuit |
| DTC P0921 | 77: Gear 1 System Referencing Failure |
| DTC P0921 | 98: Gear 1 System Motor Thermal Damage |
| DTC P0955 | 29: Manual Mode Switch |
| DTC P17C0 | 00: DCT None - EOL |
| DTC P1904 | 12: Select 2 Position Sensor Short To Battery |
| DTC P1904 | 14: Select 2 Position Sensor Short To Ground/Open |
| DTC P1910 | 11: Select 2 Solenoid Push/Pull Short To Ground |
| DTC P1910 | 12: Select 2 Solenoid Push/Pull Short To Battery |
| DTC P1910 | 13: Select 2 Solenoid Push/Pull Open |
| DTC P1910 | 15: Select 2 Solenoid LSD Short To Battery |
| DTC P1914 | 64: Shift 2 Motor Hall Sensor Circuit |
| DTC P1920 | 01: Shift 2 Motor U/V/W Circuit |
| DTC P1921 | 77: Gear 2 System Referencing Failure |
| DTC P1921 | 98: Gear 2 System Motor Thermal Damage |
| DTC P2765 | 12: Input Speed Sensor 2 Short To Battery |
| DTC P2765 | 14: Input Speed Sensor 2 Short To Ground/Open |
| DTC P2766 | 03: Input Speed Sensor 2 Circuit Range/Performance (Invalid Pulse Width) |
| DTC P2766 | 31: Input Speed Sensor 2 Circuit Range/Performance (No Pulse) |
| DTC U0001 | 88: CAN Communication Bus OFF |
| DTC U0100 | 87: Lost Communication With ECM/PCM |
| DTC U0110 | 87: Lost Communication With Drive Motor Control Module |
| DTC U0121 | 87: Lost Communication With Anti-Lock Brake System (ABS) Control Module |
| DTC U0293 | 87: Lost Communication With Hybrid/EV Powertrain Control Module |
| DTC U1004 | 87: Lost Communication With Hybrid Powertrain Control Module (H-CAN) |
| DTC U1005 | 87: Lost Communication With MCU (H-CAN) |
| DTC U1100 | 87: High Speed CAN2 Lost Communication (EMS-DCT) |
| DTC U1103 | 41: Check Sum Error With TGS Lever |
| DTC U1103 | 82: TGS Lever Alive Counter Error |
| DTC U1103 | 87: Lost Communication With TGS Lever |
| DTC U1117 | 88: High Speed CAN2 Communication (EMS-DCT) |