LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2018 >> Cadenza Technology >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Hydraulic System >> ATF Warmer >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Install in the reverse order of removal.
  2. Refill the coolant.

    (Refer to Engine Mechanical System - "COOLANT ")

  3. Refill the automatic transaxle with fluid.

    (Refer to Hydraulic System - "FLUID ")

    NOTE:
    • Be careful not to damage other hose by when tightening the clamp
    • Install the clamp in the specified direction to prevent interference with surrounding components.
    • Confirm that there is no fluid leakage on connections after repairing.
scientia non olet · About LEMON Manuals