DTC Description
The LDC sets P062F if the LDC detects impossible to reading and writing data from EEPROM.
WARNING:
Since Electric vehicles contain a high voltage battery, if the high voltage system or vehicles are handled incorrectly, this might lead to a serious accidents like electric shock and electric leakage.
* After replacing the LDC, and electric water pump (EWP), it is necessary to operate the electric water pump (EWP) with GDS and supplement and circulate the coolant.
- Be sure to shut off the high voltage by removing the safety plug before performing inspection or repairing the high voltage system. (Refer to "HIGH VOLTAGE SHUT-OFF PROCEDURES ")
- The technician removes safety plug away from vehicle to prevent the plug from being connected.
- Do not keep any metal objects (watch, ring etc.) while working on the high voltage system, which it can cause serious accidents like electric shock.
- Before beginning work on the high voltage system, the worker should wear personal protective equipment to prevent safety accidents. (Refer to "PERSONAL PROTECTIVE EQUIPMENT GENERAL SAFETY INFORMATION "
- Never allow workers who are not wearing personal protective equipment to touch the high voltage system. High voltage components should be covered with an insulation sheet to prevent safety accidents.
- Use insulation tools when working on the high voltage system.
- Put the removed high voltage components on the insulation mat.
* After replacing the LDC, and electric water pump (EWP), it is necessary to operate the electric water pump (EWP) with GDS and supplement and circulate the coolant.