DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
Case 1	DTC Strategy	Signal inspection for low voltage.	Poor connection Short to ground in signal circuit Manifold Absolute Pressure Sensor (MAPS)
	Enable Conditions	Engine speed greater than 80rpm.
	Threshold Value	Sensor voltage less than 0.2V.
Case 2	DTC Strategy	Out-of - range low voltage.
	Enable Conditions	-
	Threshold Value	MAP less than 10 kPa (0.1 bar/1.45 psi).
Diagnostic Time		Continuous.
MIL ON Condition		2 driving cycles.