LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Soul Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System Diagnosis >> DTC C1613-81: CAN Signal Error EMS >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • ECM/PCM (EMS) CAN signal check
  1. Poor connection
  2. Open or short in CAN communication line
  3. ECM/PCM (EMS)
Enable Conditions
  • 1.6s after ignition "ON"
  • 1s after battery voltage is between 9 to 16V
  • No CAN bus OFF detection
  • BSD switch ON
Threshold Value
  • Engine start signal is Invalid
Detecting Time
  • 500ms
Symptom
  • Cluster warning message is "ON"
  • BSD switch LED is "OFF"
Fail safe
  • BSD/LCA function is failure
Recovery Condition
  • Normal engine start signal received
scientia non olet · About LEMON Manuals