Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Turn ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the drive belt.
(Refer to Engine Mechanical System - "DRIVE BELT ")
Disconnect the alternator connector (A) and the cable (B) from alternator "B" terminal.

Fig 1: Locating Alternator Connector And Cable
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front engine hanger (A).

Fig 2: Locating Front Engine Hanger
Courtesy of KIA MOTORS AMERICA, INC.
Pull out the through bolt and then remove the alternator (A).

Fig 3: Locating Alternator With Through Bolt
Courtesy of KIA MOTORS AMERICA, INC.