LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2017 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Electrical >> Gauges >> Crash Pad >> Center Fascia Panel >> Repair Procedures >> Replacement

Repair Procedures: Replacement

CAUTION:
  • Put on gloves to protect your hands.
NOTE:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
  • Take care not to bend or scratch the trim and panels.
  1. Using a screwdriver or remover, remove the center fascia panel (A).
    Fig 1: Locating Center Fascia Panel
    G12225734Courtesy of KIA MOTORS AMERICA, INC.
  2. Disconnect the A/C & heater controller connectors (A).
    Fig 2: Locating A/C & Heater Controller Connectors
    G12225735Courtesy of KIA MOTORS AMERICA, INC.
  3. Install in the reverse order of removal.

    Information 

    • Make sure the connector are connected in properly.
    • Replace any damaged clips.