Repair Procedures: Replacement

Remove the hole plug (A).
After loosening the mounting bolt, then remove the front door outside handle cover (B).
Tightening torque :

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

Fig 1: Removing Hole Plug
Courtesy of KIA MOTORS AMERICA, INC.
Remove the front door outside handle (A) by sliding it rearward.

Fig 2: Removing Front Door Outside Handle
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the front door outside handle connector (A).

Fig 3: Disconnecting Front Door Outside Handle Connector
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
Information
- Be sure to install the outside handle pad (A) onto between the outside handle and the door panel.
  
  Fig 4: Locating Outside Handle Pad
  Courtesy of KIA MOTORS AMERICA, INC.
- Make sure the connector is connected properly.
- Make sure the door locks/unlocks and opens/closes properly.