| DTC Strategy |
- CAN signal check between RH BSD ECU and LH BSD ECU
|
- Poor connection
- Open or short in CAN communication line
- BSD ECU (RH/LH) communication Module.
|
| Enable Conditions |
Case 1 |
- 1.6s after ignition "ON".
- 1s after battery voltage is between 9 to 16V
|
| Case 2 |
- 1.6s after ignition "ON".
- 1s after battery voltage is between 9 to 16V
- Engine running
|
| Threshold value |
Case 1 |
- Local CAN bus communication is interrupted between RH and LH
|
| Case 2 |
- Local CAN Bus has disconnected
|
| Detecting time |
Case 1 |
|
| Case 2 |
|
| Symptom |
- Cluster warning message is "ON"
- BSD switch LED is "OFF"
|
| Fail safe |
- BSD/LCA function is failure
|
| Recovery Condition |
Case 1 |
- Actual Bus-off condition has recovered
|
| Case 2 |
- Local CAN Bus has connected
|